Incubator
Thermo Scientific Heraeus BBD6220 CO2 Incubator
Technical Specifications
Dimensions
External dimensions (w x h x d)
mm 920 x 855 x 775
inch 36 x 34 x 31
Internal dimensions (w x h x d)
mm 607 x 669 x 585
inch 24 x 27 x 23
Total volume
220
Shelves
Dimensions (w x d)
mm 560 x 500
inch 22 x 20
No. of shelves standard / maximum
number 3 / 12
Maximum area load / shelf
kg / lbs 5 / 11
Maximum total load / unit
kg / lbs 30 / 66
Weight (without accessories)
kg / lbs 107 / 236
Access port
Bottom left rear wall Ø
mm / inch 20 / 0.8
Material
Inner chamber and fittings
stainless steel
Start-up
with auto-start routine
Start-up time at set temp. of 37°C
hrs approx. 4.5
Disinfection routine
efficiency proven by an accredited laboratory
Disinfection temperature on all surfaces areas
°C / h 180 / 3
Total time
hrs ~12
Efficiency spectrum
bacteria, fungi, spores (USP 23),
Temperature control
Measuring and control range
°C TA1 + 5 … 50
Temperature deviation (time) 2
K ± 0.1
Temperature deviation at 37°C (spatial) 2
K ± 0.5
Heating up time with auto-start to 37°C
(Ambient temperature 22°C, empty unit)
hrs approx. 4.5
Ambient temperature range
°C 18 … 30
Recovery time 3
min ≤ 3
Humidity control
external water reservoir
Measuring principle
capacitive humidity control
180°C hot air disinfection
Setting range
% RH 60 … 95
Setting accuracy
% RH ± 1
Recovery time at 95% rH3
min ≤ 9
CO2 control
Measuring principle
thermal conductivity device
with auto-start and auto-zero function,
180°C hot air disinfection
Measuring and control range
Vol-% 0 … 20
Operating accuracy
Vol-% 0,1
Recovery time at 5% CO23
min ≤ 2 (max. 1.4%/min)
O2 control
Measuring principle
zirconium oxide sensor with auto-cal function,
180°C hot air disinfection
Control range
Vol-% 3 … 90
(3 ... 21% with N2-gassing, 21 ... 90% with O2-gassing)
Control accuracy
Vol-% ± 0.5
Recovery time at 7% O23 min ≤ 15
-
CROWN FLASK
MODEL: LC-41
-
Dental Chair with Adjustable Height
MODEL: LC- 02A-DJS
-
Dental Clips
MODEL: LC-DC4311
-
DENTAL HANGERS
MODEL: LC-AFH10
-
DENTURE FLASK
MODEL: LC- DN-2306
-
Electric polishing lathe
MODEL: LC- 5-MD
-
Hydraulic Bench Flask Press
MODEL: LC- 212-GJ
-
KNIFE PLASTER
MODEL: LC-SR90
-
KNIFE WAX
MODEL: LC-SJ41
-
LABORATORY HANDPIECES
MODEL: LC- 1XAM-DJS
-
Laboratory Furniture
MODEL: LC- C130Y-DJS
-
LECRON CRAVER
MODEL: LC-SR56